Omega Separations

Gas-Liquid & Liquid-Liquid Separation Technologies

Omega Separations is one of the few companies worldwide only focusing on gas-liquid and liquid-liquid separation technology to offer a tailored response for existing problems or an affordable and competitive replacement of existing equipment.

Local representation in the Eastern European markets is assured by DAWCUL, in order to handle the shortest deadlines. This can be for unforeseen emergency situations requiring immediate assistance and urgent replacement of separators; or for planned turnarounds where clients on beforehand decide not to take the mist eliminators on stock.

Omega Separations core business activities are:

Engineering Services

Custom-tailored service packages as to suit specific requirements including:

• Feasibility studies
• Process and mechanical design
• Retrofitting existing equipment
• Optimization of performance

To complete its product range, Omega Separations works closely together with selected suppliers for:

• Fiberbed Mist Eliminators
• Plate Packs
• Vane Type Inlet Devices
• Liquid Distribution Baffes
• Slotted T-shaped Inlet Devices

Product Portfolio

Wire Mesh Mist Eliminators & Coalescers

Wire Mesh Mist Eliminators are easy to install cost effective separators that are able to collect liquid particles 2 to 10 microns in diameter with essentially 100% efficiency if designed properly to the process conditions. They are available in almost any size or shape and can be manufactured in a broad range of metals or plastics. They are produced as multiple layers of knitted mesh making it a dense pack and presenting a large surface area to the droplets entrained in the gas stream. The separation of the droplets is achieved by impingement on, and capture by, the wires of the mesh where the droplets coalesce and drain.

Benefts of Omega Separations’ Wire Mesh Mist Eliminators

• High collection efficiency
• Low installed cost
• Low pressure drop
• Fast delivery and service

Vane Pack Mist Eliminators

Vane Pack Mist Eliminators are high capacity separators; they collect essentially 100% of all particles greater than 8 to 40 microns in diameter, depending on design parameters. They are assembled as banks of parallel vane profiles. This design causes the gas to change direction a number of times from inlet to outlet of the separator. The inertia of the liquid droplets forces the entrained liquid droplets to impinge on the vane surfaces where they form a liquid film and drain. Simple Vane Pack profiles are particularly suitable for applications with a significant risk of fouling due to solid particles or high viscosity liquids in the feed.

Benefits of Omega Separations’ Vane Pack Mist Eliminators 

• Suitable for applications where solids or sticky and viscous liquids are present and would plug a wire mesh mist eliminator
• Good collection efficiency in low pressure drop and vacuum applications
• Suitable for both vertical and horizontal gas flow
• Suitable for higher liquid and gas loads

For more product specification information, please download the Omega Separations data sheet.

Dawcul is a Trusted Distributor for Omega Separations

For expert advice on procurement, logistics and installation talk to one of our local experts across Eastern Europe.